Stainless Steel Fastener - 10-32 Thread, 1/4" Long, Phillips Flat Head

[dvinton]

I need three of these. Would a local hardware store order them, or do I need to go into Guadalajara? If so, where?

Here's a link to what I'm looking for: https://www.mcmaster.com/91771A825/

Thanks,

Don

[CanuckBob]

Check Amazon and Mercado Libre too.

[ferret]

1/4 inch is 6.35 mm
I am including the entire search on Amazon.com.mx so you can see the results. There are two possibilities on the first page... one is 5 mm. and the other is 6 mm. I didn't go past the first page. My search was for "Tornillos de acero inoxidable cabeza tipo Phillips".

https://www.amazon.com.mx/s?k=tornillos+acero+inoxidable+cabeza+tipo+Phillips&__mk_es_MX=%C3%85M%C3%85%C5%BD%C3%95%C3%91&ref=nb_sb_noss

[Gamina]

Have your tried any local hardware stores? Particularly Jara, who has everything.

[ComputerGuy]

Mexico is not a land that takes much interest in screws and fasteners. The biggest hardware store in Guad, Home Depot, has a huge wall with a pathetic selection. You can certainly check out all the stores here yourself, but I can't even find a good variety of  Phillips most of the time at any of them, let alone Robertson.

Passivation is an anti-corrosion thing, so that may not be necessary.

Probably save yourself a lot of hassle by following Ferret.

https://www.amazon.com/Stainless-Machine-Screws-Phillips-Thread/dp/B08RJ49YT5/ref=sr_1_21?tag=detailedview-20&dchild=1&keywords=18-8+Stainless+Steel+Phillips+Flat+Head+Screw&qid=1632429408&sr=8-21

Too long, but maybe could be cut.

[mudgirl]

They sell stainless steel screws at Home Depot. Whether they have the size you want with a Phillips head is something you'd have to check out for yourself

[desafinada]

There is a hardware store on the east side of the librimiento that has a large selection of fasteners. Sorry, don't remember the name.

[Plan B]

There is a hardware store on the Libermento close to the fire station that carry a large assortment of fasteners.

[dvinton]

All, thanks for the recommendations! Not quite the same as going to an Ace Hardware and cull through an aisle or two of Midwest Fastener drawers. ;)

[RVGRINGO]

Especially difficult, since the world is now Metric.....Except for that one special place with an Ace Hardware.

[Sponsored content]